Home > IP Network PA System >

10w Power Consumption IP Decoding Terminal With One 10/ 100M RJ45 Network Interface

Product Categories

Ceiling Speaker [65]
Commercial Audio [10]
Column Speaker [17]
Wall Speaker [30]
Horn Speaker [19]
Hanging Speaker [3]
Projector Speaker [2]
Garden Speaker [8]
Active Speaker [8]
Volume Controller [25]
Mixing Amplifier [7]
Power Amplifier [7]
IP Network PA System [14]
SIP PA System [2]
Security System [3]

VOXPA Electronics Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

10w Power Consumption IP Decoding Terminal With One 10/ 100M RJ45 Network Interface

Place of Origin : Guangdong, China

Model Number : IP-0100

warranty : 3years

dimension : 484*303*88

snr : >/=65DB

Frequency response : 80HZ-16KHZ+1DB/-3DB

Contact Now

10w Power Consumption IP Decoding Terminal With One 10/ 100M RJ45 Network Interface

Product Description

This IP decoding terminal IP-0100, housed in a 2U rack with an elegant aluminum panel, boasts an industrial - grade
dual - core chip for a sub - 1s startup. With ultra - low latency (＜30ms) in audio capture, play and call, plus smart power
management and remote upgrade support via LAN/WAN, it’s your all - in - one solution for efficient, seamless audio networking.

Features

◆2U rack size,with beautiful and practical aluminum panel.

◆One 10/100M RJ45 network interface, support LAN and WAN.

◆Use industrial-grade dual-core processing chip (ARM+DSP), and the start-up time is less than 1S.

◆Level indicator light.

◆Built-in network IP decoding module with real-time broadcast of network music and call functions; The latency of the capture, play, and call functions is less than 30mS.

◆1 input interface of expandable ambient noise detection, 1 aux output interface of audio signal. External power amplifier expandable.Convenient for wiring connection withRCA interface.

◆Built-in fire cutting function, compatible with four-wire fire cutting. An external 24V strong cut power module is required.

◆The service software remotely adjusts the network audio output volume and treble and bass.

◆Two 2200W power amplifier interface.with intelligent power management functions. When there is no program or broadcast, the output power is automatically cut off for energy saving .
◆Support remote upgrade of LAN and WAN.

Model	IP-0100	IP-0143		PD-80M	PD-120M
Audio Mode	MP3/MP2			Rated Power	Iput Voltage	Sensitivity
Display	/		4.3 inch LCD
Transfer Rate	100Mbps			60W	80W	120W
AUX Input Sensitivity	350mV(unbalanced)			120W		90DB
MIC Input Sensitivity	5mV(unbalanced)			240W		92DB
Frequency Response	80HZ-16KHZ+1DB/-3DB			360W
THD	THD</=1%			560W
SNR	>/=65DB			650W
Operating Temperature	5℃-40℃
Operating Humidity	20℃-80℃
Dimensions(mm)	48430388					21525066

Product Tags: